Skip to content Skip to footer

One City Makes the World’s Screens: Inside Shenzhen’s Digital Signage Supply Chain

Almost every digital signage brand claims to be an international technology company. A large share of the hardware, the components and – increasingly – the software inside those products comes from one metropolitan area in southern China.

The concentration

Shenzhen is usually described as China’s technology capital, home to Huawei, Tencent, DJI and BYD. For the display industry it is something more specific: the manufacturing, engineering and innovation hub where Absen, Maxhub, TCL and Unilumin, among hundreds of others, are headquartered or produce.

What makes the city unusual is not that factories exist there – it is that the entire value chain sits inside one region. LCD panel factories and display assembly lines operate alongside LED manufacturers. Mainboard suppliers, power supply specialists, cable manufacturers and enclosure fabricators are often within a short drive of each other. Coordination that would take weeks or months across Europe or North America can happen in hours.

For a signage company, that translates into something concrete: immediate access to every component needed to turn an idea into a commercial product, and in principle a prototype within one or two days. Very few places in the world can compress a development cycle that far.

The part the industry does not advertise

The Shenzhen advantage extends well beyond assembly. Many international display brands source not only hardware but firmware, system-on-chip integrations, remote management platforms and – in some cases – complete content management systems from local technology providers.

In a significant number of cases, technology developed by Chinese specialists is white-labelled and sold worldwide under well-known international brand names. The signage industry rarely discusses this, because the brand premium depends on the customer believing the software was built by the company that sold it.

The consequence is a market structure with far less differentiation than its marketing suggests. Two competing European brands may be running the same management platform with different user interfaces and different support contracts. When a buyer evaluates them, the honest comparison is not between two technologies but between two service organisations wrapped around one.

This matters most in procurement. A public sector buyer or a large retail chain specifying a CMS for a ten-year deployment is effectively betting on a supplier’s roadmap, and if that roadmap is licensed from a third party in Shenzhen, the leverage to change it is limited. Asking who writes the code is a more useful question than asking which features exist today.

OEM versus ODM, and why it matters

As LCD and LED hardware becomes increasingly commoditised, brands are shifting from OEM to ODM sourcing. The distinction is precise and consequential.

In an OEM model, the brand designs the product and a manufacturing partner builds it to that specification. In an ODM model, the manufacturer both designs and produces the product, and the brand sells it under its own name.

OEM-led companies typically retain more intellectual property, more product differentiation and a longer-term competitive advantage, because they control the design decisions that make their product different. ODM-based brands get lower development costs and faster time to market, but they often end up selling products that are fundamentally similar to those of their competitors, because they came from the same design house.

The shift is most pronounced in entry-level products, where margins are thin and differentiation is hard. A 43-inch commercial display with a standard player board is not a product that rewards original design; it rewards supply-chain access. Premium and application-specific products still tend to be OEM, because that is where a brand’s engineering can earn its margin.

For buyers, the practical test is service and firmware. An ODM product can be entirely fit for purpose – many are – but the brand’s ability to fix a firmware bug, add a protocol or support a new content format depends on its relationship with the designer, not on its own engineering team.

The LED question: COB versus MIB

LED is gaining share against LCD, and it is in LED that Shenzhen’s dominance is most complete. The city and the surrounding Guangdong region form the global centre of LED display manufacturing, and the packaging technology debate happening there determines what the rest of the world can buy.

Two approaches are competing. COB – chip on board – mounts LED chips directly onto the circuit board and encapsulates them with a protective layer, delivering excellent durability, contrast and black levels. It has become the preferred solution for premium indoor applications below 1.5 millimetres pixel pitch.

MIB – micro LED in package – combines the manufacturing advantages of traditional SMD packaging with some of COB’s performance benefits, integrating multiple micro-LED chips into very small packages before mounting them to the board. That allows high yields, easier repair and lower production costs while keeping image quality close to COB.

Many Chinese suppliers now see MIB as a bridge technology between conventional SMD and full COB production. That matters commercially because COB and COG manufacturing require considerably larger investment than SMD factories, which means the transition path a manufacturer chooses determines its cost base for the next several years – and therefore the price at which fine-pitch LED reaches Western retail and transport projects.

The cost story has changed

The assumption that China is the low-cost manufacturing destination no longer holds in the way it did twenty years ago. Labour costs have risen substantially, and countries such as India and Vietnam often offer lower wages. Many signage brands have moved manufacturing, or at least assembly, away from China as a result.

Shenzhen nonetheless keeps its advantage, because the combination of engineering talent, supplier density, logistics infrastructure and manufacturing experience continues to outweigh higher labour costs for many projects. Being able to design, prototype, test and scale within a single ecosystem often delivers more value than a lower hourly rate somewhere else.

There is also policy. Professional displays, LED technology and broader digital infrastructure remain strategic priorities in China’s industrial plans, and the current five-year plan identifies digital signage as one of the key strategic technologies for sovereignty – a framing aimed more at defence and infrastructure than at retail media. Local and national programmes continue to support investment in advanced manufacturing, display technology and export-oriented technology companies.

That support had a decisive effect on the global industry: it made LCD manufacturing uneconomic for Korea’s industrial giants. Factories moved to China first, and in recent years the patents required for manufacturing were sold to China’s large display manufacturers as well. The supply chain concentration now visible in Shenzhen is the cumulative result of that shift.

Why the city’s demography matters

Shenzhen’s rise is recent enough to be disorienting. Three decades ago it was a collection of fishing villages near Hong Kong. Today it is a metropolis of more than 18 million people and one of the world’s leading technology centres.

Its demographic profile is just as striking. Shenzhen remains one of China’s youngest major cities, and much of its population consists of migrants who arrived seeking opportunity. The result is a business culture that is entrepreneurial, ambitious and growth-focused in a way that differs from established industrial regions – and which explains why the export orientation took hold early.

Unlike industrial clusters that primarily serve domestic demand, Shenzhen’s technology sector was built around exports from the beginning. Manufacturers are accustomed to international standards, global logistics, OEM and ODM partnerships and rapid customisation for overseas markets. That orientation is precisely what turned local contract manufacturers into globally recognised brands.

The signal in the summit

The decision to host APEC in Shenzhen is a statement. China is using the summit to showcase a city that represents its broader economic ambitions: innovation, advanced manufacturing, technology leadership and international trade.

For the signage industry, the message is narrower and harder to avoid. Whether global brands like it or not, much of the industry’s future remains connected to what happens in Shenzhen – from LED innovation and display manufacturing to software development and supply-chain resilience. The screens in shopping centres, transport hubs, corporate workplaces and public spaces around the world are, to a remarkable degree, Shenzhen products with someone else’s logo on them.

Why it matters, in one line

When components sit minutes apart and a prototype takes days, the city that makes the screens also decides what the screens can be – and the quiet shift from OEM to ODM means many of the industry’s most familiar brand names are now selling designs they did not create.

Source: invidis, “Deep-Dive Shenzhen: The Workshop of Global Digital Signage”, 17 November 2026.